Top 10k strings from Z80 Emulator v3.0 - PC Tape Adapter Diagram (1994)(Gerton Lunter)[a].z80 in <root> / bin / z80 / software / Sinclair Spectrum Collection TOSEC.exe / Sinclair ZX Spectrum - Utilities & Educational / Sinclair ZX Spectrum - Utilities & Educational - [Z80] (TOSEC-v2007-01-01) /

Back to the directory listing

   3 0forbest result
   3  Parts List",
   1 eds to be adjusted forbest results. The bar, appearingin a moment, should point just  below 50 if there's a signal,   and should go to 0 when there   isn't."
   1 eds to be adjusted forbest results. The bar, appearingin a mo"
   1 eds to be adjusted forbest results. The bar, appea"
   1 The registered version of 'Z80' version 2.0 can load Spectrum   programs directly from tape, andwrite them back."
   1 Parts List",
   1 ;"This program checks your tape   interface. The bar at the top of"
   1 ) Parts List",
   1 ''"The registered version of 'Z80' version 2.0 can load Spectrum   programs directly from tape, andwrite them back."
   1 ''"The Emulator does not need to be in Real mode for this program"
   1 ''"Resistors:","330",,"4.7k",,"10k",,"120k"
   1 '"The variable resistor in the    diagram needs to be adjusted forbest results. The bar, appearingin a moment, should point just  below 50 if there's a signal,   and should go to 0 when there   isn't."
   1 '"Pot. meter:","25k linear"
   1 '"In order to connect your PC to atape recorder you need an adap- ter. You just saw the circuit   diagram of a simple tape adapterwhich proves to work very well."
   1 '"Capacitors:","4.7nF",,"680nF"
   1 '"(Press any key)"
   1 "the screen should jump around"
   1 "50 if there is a signal."
   1  Tape-adapter for PC's",
   1  75    100"